SAMSUNG

KLMAG1JETD-B041006

A: The KLMAG1JETD-B041006 is fully compliant with the JEDEC eMMC 5.1 standard and is backward compatible with previous eMMC versions (4.x/5.0). The table below summarizes its core specifications: Parameter Value Storage Capacity 16 GB Interface Standard eMMC 5.1 (JEDEC) Package Type FBGA-153 (11.5 × 13.0 × 0.8 mm) Operating Voltage VCC (NAND) = 2.7V – 3.6V; VCCQ (Controller) = 1.7V – 1.95V / 2.7V – 3.6V Operating Temperature –25°C to +85°C HS400 Interface Supported (High‑Speed Dual Data Rate, 400 MB/s) Sequential Read Speed Up to 330 MB/s Sequential Write Speed Up to 50 MB/s Max Clock Frequency 200 MHz RoHS Compliance Lead‑Free & Halogen‑Free ECC, Bad Block Management, Wear Leveling Built‑in Bus Width Options 1‑bit / 4‑bit / 8‑bit Important performance characteristics include built-in ECC for data integrity, advanced bad block management, and dynamic wear leveling to extend the lifespan of the NAND flash memory. Power consumption is minimized by the eMMC 5.1 standard's improved power management features and a low‑power standby mode.

A: The KLMAG1JETD-B041006 uses the standardized JEDEC eMMC 5.1 protocol, which operates similarly to an MMC device. This allows the host processor to read from and write to the memory using a simple, industry‑standard command set. The device is accessed via a serial MMC bus and supports flexible bus width configurations: 1‑bit, 4‑bit, or 8‑bit modes. For high‑performance applications, the device supports HS200 (High‑Speed 200 MHz at 1.8V signaling) and HS400 (High‑Speed Dual Data Rate 400 MB/s) interface modes, which enable superior data throughput. The 153‑ball FBGA package is designed for surface‑mount technology (SMT), enabling automated and cost‑effective PCB assembly. Detailed pin mapping and PCB footprint information are available from the manufacturer‘s datasheet.

A: As an embedded storage solution, the KLMAG1JETD-B041006 is designed for long‑term reliable operation. Key reliability features include: Built‑in Error Correction Code (ECC): Automatically detects and corrects bit errors that may occur during read/write operations, ensuring data integrity. Bad Block Management: The integrated controller identifies and manages defective NAND blocks, mapping them out of the usable storage space to prevent data corruption. Dynamic Wear Leveling: Distributes write and erase cycles across the NAND array, preventing excessive wear on any single block and significantly extending the device‘s operational lifetime. Data Retention: The NAND flash technology used in this device provides years of reliable data retention under normal operating conditions, although specific numerical retention figures are not publicly disclosed. For precise technical details, engineering teams should consult the official Samsung datasheet. The device supports an industrial‑grade operating temperature range of –25°C to +85°C (mobile temperature grade), ensuring stable operation in diverse environmental conditions for automotive, industrial, and consumer applications. The device is also RoHS compliant and environmentally friendly.

A: Thanks to its 16GB capacity, HS400 high‑speed interface, compact FBGA footprint, and wide operating temperature range, the KLMAG1JETD-B041006 is well‑suited for a broad range of applications, including: Smartphones and tablets — main storage for OS, apps, and user data Automotive infotainment systems and navigation units Industrial automation and embedded controllers (PLCs, HMIs) IoT devices and smart controllers Medical diagnostic equipment and data logging instruments Smart appliances and security systems Consumer electronics requiring reliable high‑speed embedded storage Product Lifecycle Status: Multiple distributor sources (including Memorysolution and Glochip) confirm that the product lifecycle status is Active / Mass Production, indicating that Samsung continues to manufacture this device and that it is readily available in the market for new designs and ongoing production. The device is supplied in tray packaging with a standard quantity of 1,120 pieces per tray.