Winbond Electronics Corporation 계산하기

W25R128JWPIQ

A: The W25R128JWPIQ is a low‑voltage, 1.8V device, optimized for power‑sensitive, high‑performance systems. The table below summarises its core specifications drawn from official manufacturer and distributor sources: Specification Value Memory Density 128 Mbit (16 MByte) Memory Organization 16M × 8 bits Memory Technology NOR Flash Interface Type SPI with Single, Dual, and Quad I/O Max Clock Frequency 104 MHz Supply Voltage (VCC) 1.7 V to 1.95 V (low‑voltage 1.8V operation) Operating Temperature –40°C to +85°C (industrial grade) Memory Interface SPI (Serial Peripheral Interface) Package Type 8‑pad WSON (6 × 5 mm) with exposed pad Carbon Data Y (carbon emission data available) RoHS Status ROHS3 Compliant, Halogen‑Free Moisture Sensitivity Level (MSL) 3 (168 hours) Endurance 100,000 program/erase cycles (minimum) Data Retention 20 years (minimum) Interface Protocol SPI with Single, Dual, and Quad I/O Reference Standard Supports JEDEC Standard Beyond the high-performance interface and industrial temperature range, the key differentiator of this family is the integrated Replay Protection Monotonic Counter (RPMC). This feature, combined with its 100,000 program/erase cycles and 20‑year data retention, ensures data integrity and secure authentication even in harsh or mission‑critical environments.

A: The device communicates via a standard 4‑wire Serial Peripheral Interface (SPI) bus, supporting the widely adopted SPI Mode 0 and Mode 3 for compatibility with a vast range of microcontrollers and SoCs. Communication is initiated by driving the Chip Select (CS#) pin low. The interface signal groups are as follows: Pin Signal Group Function CS# (Chip Select) Enables the device when driven low CLK (Serial Clock) Provides the clock signal for data transfer (up to 104 MHz) DI (Serial Data Input) Transmits data from the host to the device DO (Serial Data Output) Transmits data from the device to the host WP# (Write Protect) Hardware write protection for the memory array HOLD# (Hold) Pauses an ongoing serial communication without resetting the instruction For enhanced data throughput, the device supports multiple SPI protocols: Standard SPI (Single I/O): Uses DI (data in) and DO (data out) pins for 1‑bit transfers. Dual SPI (Dual I/O): Uses IO0 and IO1 pins as bidirectional I/O, transferring 2 bits of data per clock cycle. Quad SPI (Quad I/O): Uses all four I/O pins (IO0, IO1, IO2, IO3) for simultaneous transfer of 4 bits per clock cycle, achieving an effective data rate equivalent to 416 MHz (104 MHz × 4). The Continuous Read Mode allows efficient memory access, enabling true Execute‑In‑Place (XIP) operation where the host executes code directly from the flash without copying it to RAM first.

A: The W25R128JWPIQ is engineered for high reliability, particularly in security‑sensitive and mission‑critical applications. Key specifications include: Reliability Parameter Specification Write Endurance 100,000 program/erase cycles (minimum) per sector Data Retention 20 years (minimum) Operating Temperature –40°C to +85°C (industrial grade) RPMC Support Yes – Integrated Replay Protection Monotonic Counter Memory Technology NOR Flash (single‑level cell – SLC) Package Moisture Level MSL 3 (168 hours) The Replay Protection Monotonic Counter (RPMC) is a hardware security counter within the device that can only be incremented (never decremented). This unique feature prevents replay attacks by allowing the host to track how many times a specific piece of data has been accessed, making it ideal for secure boot, device authentication, and protection of sensitive parameters. The SLC NOR Flash architecture provides inherent high reliability, making the device suitable for applications that require frequent firmware updates and long‑term code storage in harsh environments.

A: The W25R128JWPIQ is well‑suited for embedded systems requiring both high‑performance code storage and integrated hardware security. Typical applications include: Industrial control systems – PLCs, HMIs, and factory automation equipment. Automotive electronics – Infotainment systems, navigation units, and engine control units (ECUs). IoT devices and Secure authentication modules – Wi‑Fi modules, smart home controllers, and hardware security platforms using the RPMC feature. Consumer electronics – Smart TVs, set‑top boxes, and digital cameras. Medical devices – Diagnostic equipment, patient monitors, and portable instruments. ⚠️ Important Lifecycle Information: The lifecycle status for the W25R128JWPIQ is conflicting across official manufacturer and distributor sources: Winbond‘s official product page lists the Industrial Status as “P” (Mass Production) and the Longevity (WPLP) field as “N”, meaning the part is currently in mass production but not committed to Winbond’s Product Longevity Program. This indicates that while active, its future supply beyond a typical production lifecycle may not be guaranteed for extended 10‑year product lifespans. However, multiple distributor databases list the part status as “Active” or “在售” (In Stock) with available inventory . Given the conflicting lifecycle reports between official Winbond status (“Longevity: N”) and distributor “Active” listings, engineers are strongly advised to verify current lifecycle status, availability, and lead times directly with an authorised Winbond distributor before committing this part to a new high‑volume design. For projects requiring long‑term supply assurance (10+ years) with WPLP support, engineers should select Winbond NOR Flash devices with “Longevity: Y” status. For designs that specifically require the RPMC security feature, the W25R128JWPIQ remains a viable active choice with mass production status, but long‑term availability should be confirmed with the manufacturer. The device is available in Tape & Reel (TR) packaging with standard reel quantities of 2,000 units per reel【8†8】【9†2-L3】, and factory lead times are reported as 28 weeks【8†10】.