GigaDevice 계산하기

GD25WD20CTIGR

A: This device offers a good balance of speed, power, and reliability. The table below summarizes its main specifications: Specification Value Memory Density 2 Mbit (256 Kbyte) Memory Organization 256K x 8 bits Operating Voltage (VCC) 1.65V to 3.6V Maximum Clock Frequency 100 MHz Active Read Current 20 mA (max) Page Program Time (Tpp) 1.6 ms Block Erase Time (32KB) 0.5 s Operating Temperature (Industrial) –40°C to +85°C Endurance 100,000 program/erase cycles (minimum) Data Retention 20 years Package Type 8‑pin SOP (SOIC‑8) Interface SPI / Dual I/O / Quad I/O Packaging Tape & Reel (3000 units per reel)

A: The device uses a standard 4‑wire Serial Peripheral Interface (SPI) bus and supports multiple high‑performance modes: Standard SPI (Single I/O): Uses separate SI (data in) and SO (data out) pins for conventional 1‑bit transfers. Dual I/O: The SI and SO pins become bidirectional I/O pins (IO0 and IO1) to transfer 2 bits per clock cycle, doubling the data rate. Quad I/O: All four I/O pins (IO0, IO1, IO2, IO3) are used for simultaneous data transfer, achieving 4‑bit per cycle throughput. When operating at the maximum 100 MHz, this yields an effective data rate of up to 400 MHz.

A: The GD25WD20CTIGR is designed for long-term reliability. It is rated for a minimum of 100,000 program/erase cycles per sector, making it suitable for applications that require frequent firmware updates or data logging. Additionally, the device guarantees a minimum data retention period of 20 years, ensuring stored information remains intact and reliable over an extended operational lifespan.

A: This device is well‑suited for a broad range of embedded applications requiring code and data storage in a compact, low‑pin‑count package. Typical use cases include: Firmware and boot code storage in embedded systems (bootloaders, BIOS, system firmware) supporting Over‑The‑Air (OTA) upgrades. Configuration and parameter storage for device settings, calibration constants, and user preferences. Industrial control systems (PLCs, HMIs, automation equipment). IoT edge devices and wireless modules (Wi‑Fi, Bluetooth, smart home controllers). Medical devices and patient monitors. Consumer electronics (smart TVs, set‑top boxes, wearables). ⚠️ Important Lifecycle Information: The product lifecycle status for the GD25WD20CTIGR is conflicting across distributor sources: Active Status: Major distributor databases (Ample‑Chip, Eiyu) list the Part Status as Active, and the device is in stock with some distributors (e.g., Symmetry Electronics reports 565 in stock). Obsolete Status: However, Oneyac explicitly states "该型号已停产！ (This model has been discontinued / Obsolete)". Given the contradictory reports, engineers are strongly advised to verify current lifecycle status, availability, and lead times directly with an authorised GigaDevice distributor (such as Mouser, Digi‑Key, Farnell, or LCSC) before committing this part to a new high‑volume design. For projects requiring long‑term supply assurance, the GD25WD20CTIGR may still be available from some distributors, but qualification of an alternative part is recommended.